Introduction
The enTourage Pocket eDGe may experience battery failure. If you need to replace the battery of your enTourage Pocket eDGe for any reason, follow this guide.
Parts
-
-
Open the Pocket Edge and place device with the screens face down. The side containing the stylus should be on the left.
-
Remove all eight elliptical rubber tabs covering screws using your finger or spudger.
-
-
-
Using your J1 Phillips head screwdriver, remove all eight 6mm screws from the back of your device.
-
-
-
Using the plastic opening tool, lift the back plate from both sides of your device and remove them.
-
-
-
Locate the side containing the battery. Lift the top of the battery out using your finger and the indentation at the top.
-
-
-
Carefully unplug the bottom side of the battery from the connecting plug and set the disconnected battery aside.
-
To reassemble your device, follow these instructions in reverse order.
One comment
Great tutorial! I have two of these. Does anyone know where I can buy a replacement battery? I have looked everywhere. I would retrofit if I could find one large and flat enough. 7.2v 2000mA. Hate to have to trash them but they don’t make parts anymore.
Ron -