Introduction
Replacing a scratched or cracked lens is an easy fix that will help you get back out on the mountain ASAP. Follow this guide for instructions.
- 
                  
                  - 
            Hold the iON in your hands with your thumbs on the clips next to the middle of the lens. 
- 
            Pull the rubber housing apart to release the first two clips. 
 
- 
            
- 
                  
                  - 
            Grab the inside of the plastic nose rest with your thumb and index finger. 
- 
            Rotate the nose rest upwards until you feel that it is free from the lens. 
 
- 
            
- 
                  
                  - 
            Grab the top of the goggle frame that holds the camera assembly. 
- 
            Rotate the frame outwards until you feel that the clips inside it are free. 
 
- 
            
- 
                  
                  - 
            While firmly holding the goggles with the palm of one hand, grab the top right corner of the frame and rotate it away from the lens. 
 
- 
            
- 
                  
                  - 
            While holding the goggles in one hand, use the other to grab the lens from opposite ends, and rotate it out of the housing and away from any remaining clips. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
One comment
I’m guessing I need a special lens for a replacement could you point me in the direction of new lens for my zeal ions