Windshield Bracket Mount Replacement

Written By: Olivia Breazeale
  • Comments: 0
Windshield Bracket Mount Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Prerequisite only guide for replacing the windshield bracket mount.

  1. XlwqXpZDjPunEatF
    XlwqXpZDjPunEatF
    eQDPk3gdqt2YITML

    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

  2. YVQZIquXSLEtGFAM
    YVQZIquXSLEtGFAM
    eJnDfLTqM3fTo1xE

    • Pull the black plastic back case off of the device.

  3. eDnd1jveGsFaLqJ1

    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

  4. DAL6qIMhXESf2eBb

    • Remove the windshield bracket mount.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Olivia Breazeale

Member since: 25/09/15

158 Reputation

0 comments