- 
                  
                  - 
            With foot OFF the brake (don't want to start the car), push the start button (headlamps and interior systems come on). 
 
- 
            
- 
                  
                  - 
            Push the accelerator pedal in for ten seconds then let go - you will hear the water pump cycle on. 
 
- 
            
- 
                  
                  - 
            Set a timer for 12-15 minutes. In this time period, you will hear the water pump cycle on and off and coolant gurgling at the reservoir. 
 
- 
            
- 
                  
                  - 
            After 12-15 minutes turn the car off, remove the reservoir cap and check the fluid - it should be slightly below where you started. 
 
- 
            
- 
                  
                  - 
            Start your car. Watch your temperature. If the car will run without overheating you're done. If you will notice that the temperature is rising repeat these steps. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.