Introduction
This guide will help you replace the batteries of your Tribit X Sound Go speaker.
Note: There might be a swollen battery or battery acid, please use caution.
Tools
- 
                  
                  - 
            Insert a spudger in the seam between the front speaker grill and chassis. 
- 
            Pry around the perimeter until the front grill releases. 
- 
            Remove the front grill. 
 
- 
            
- 
                  
                  - 
            Remove the 14 Phillips screws around the perimeter of the speaker. 
- 
            Lift off the speaker housing. 
 
- 
            
- 
                  
                  - 
            Disconnect the batteries by pulling the battery connectors directly out of their motherboard ports. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
4 comments
I couldn't find online the exact battery replacement, any suggestions?
fred -
Same here. What is the replacement battery number?
I am having difficulty finding a replacement battery with the same configuration as what is shown and in my device. I am going to try reaching out to the company’s customer service and see what they have to say.