Introduction
Removing the lens mount is a quick process that is fully outlined by this guide.
Tools
- 
                  
                  - 
            If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off. 
 
- 
            
- 
                  
                  - 
            Flip the camera over such that the power switch points down. 
- 
            Slide the switch on the bottom of the camera grip towards the lens to open the battery door. 
 
- 
            
- 
                  
                  - 
            With the battery door open, push the blue lever in the battery compartment to release the battery. 
 
- 
            
- 
                  
                  - 
            To the left of the battery compartment, the SD card needs to be pushed down slightly with your fingers, which will cause the card to eject. 
- 
            Pull the card out with your fingers. 
 
- 
            
- 
                  
                  - 
            First, turn the camera upside down. 
- 
            Press the button located next to silver lens mount and rotate the lens counterclockwise. 
- 
            Pull the lens away from the camera body. 
 
- 
            
- 
                  
                  - 
            With the front of the camera facing you, remove the four silver #00 Phillips screws from the metal lens mount. 
 
- 
            
- 
                  
                  - 
            Remove these three layers from the lens mount with your finger or by turning the camera face down. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.