Introduction
These instructions will guide you step-by-step to remove the door in order to get to the speakers inside
Tools
- 
                  
                  - 
            Place the camera on a flat service, so that the strap is downward and the lens is facing you. 
- 
            First, lift up the connector. 
- 
            Then pull it back. 
- 
            Remove the connector from the device. 
 
- 
            
- 
                  
                  - 
            Position the camera so that the screen tab is pointing towards you. 
- 
            Twist the tab clockwise one notch. 
- 
            Remove the single screw. 
 
- 
            
- 
                  
                  - 
            Place the camera so that the lens is facing downward and the battery compartment is facing towards you. 
- 
            Remove the single screw. 
 
- 
            
- 
                  
                  - 
            Lay the device on its side so it is resting on the strap and the bottom of the camera is facing you. 
- 
            Remove the five screws. 
 
- 
            
- 
                  
                  - 
            Close the LCD screen door. 
- 
            Turn the camera to the eye piece and battery compartment is facing you. 
 
- 
            
Your door will now be disassembled in order to replace parts inside and these steps in reverse order will also help you put the door back together