Introduction
Removing the camera shell is an easy task that can be done in a couple of minutes.
Tools
- 
                  
                  - 
            Using your right index finger and thumb, pull the battery toward you and then away from the camera. 
 
- 
            
- 
                  
                  - 
            With the blue plastic opening tools, gently pry the plastic casing surrounding the start/stop button free. 
- 
            Remove the casing using your right thumb and index finger. 
 
- 
            
- 
                  
                  - 
            Flip open the LCD panel to get to the side panel. 
- 
            Remove the three 5.5 mm Phillips #00 screws. 
 
- 
            
- 
                  
                  - 
            Turn the camera around to the grip side and remove the 5.5 mm Phillips Head screw using your J00 Phillips Head screwdriver. 
 
- 
            
- 
                  
                  - 
            Orient the camera so the bottom is facing you. 
- 
            Use the blue plastic opening tools to gently ease the camera shell off of the camera. 
- 
            Rotate the camera so the LCD side panel is facing you and gently pry the shell off from the camera. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.