Introduction
We are going to explain the steps needed and what is necessary in order to replace a broken front cover for this camera.
Tools
- 
                  
                  - 
            Slide the battery cover in the direction the arrow points. 
- 
            Pull the battery cover towards you. 
 
- 
            
- 
                  
                  - 
            Using the Phillips #00 Screwdriver, remove the two screws from the caution panel. 
- 
            Remove that panel. 
 
- 
            
- 
                  
                  - 
            Remove the screw with a Phillips #00 screwdriver from the left side of the camera (with '3x optical zoom' engraved on the side panel). 
- 
            Remove that panel. 
 
- 
            
- 
                  
                  - 
            Remove the screw using the Phillips #00 screwdriver from the bottom of the camera, closest to the back cover. 
 
- 
            
- 
                  
                  - 
            Remove the screw using a Phillips #00 screwdriver on the right side (where the caution panel used to be). 
 
- 
            
- 
                  
                  - 
            Remove the small screw using a Phillips #00 screwdriver on the bottom of the camera attached to the front cover. 
- 
            Gently remove the front cover. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.