Introduction
This guide will show you how to access the LCD screen in order to repair or replace the screen.
Tools
- 
                  
                  - 
            Remove Memory Stick Pro from the card reader slot on the bottom of the camera. 
- 
            Remove both batteries. 
 
- 
            
- 
                  
                  - 
            Remove the single visible screw from both sides of the camera. 
- 
            Remove the two screws that are adjacent to the warning label, which is on the underside of the camera. 
 
- 
            
- 
                  
                  - 
            The LCD screen sits in two slots; one on the bottom, and one on the left edge. 
- 
            Slide LCD screen from the two slots. 
 
- 
            
- 
                  
                  - 
            To remove the LCD screen, detach the orange cable from the board. 
- 
            If needed, replace the LCD screen. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.