Introduction
This guide will allow the user to take off the front cover of the camera.
Tools
- 
                  
                  - 
            The battery compartment is located on the bottom of camera. 
- 
            Move the slider from the 'lock' position to the 'open' position. 
 
- 
            
- 
                  
                  - 
            Pull battery from compartment. 
- 
            Insert newly charged battery into compartment, as shown in diagram (located in compartment). 
- 
            Shut compartment door. 
- 
            Move the slider back to the 'lock' position. 
 
- 
            
- 
                  
                  - 
            The 4 mm length screws are located on each side and on the bottom of the camera. 
- 
            2 screws on each side (4 total). 
- 
            2 screws on bottom. 
 
- 
            
- 
                  
                  - 
            Gently pry around the front cover using the plastic opening tool. 
- 
            Carefully separate front cover from body of camera. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.