Introduction
Tools
- 
                  
                  - 
            Push in the button next to the lens. 
- 
            While holding the button twist the lens counter-clockwise. 
- 
            Pull up and remove lens from camera. 
 
- 
            
- 
                  
                  - 
            Inside toward the top you will find a small slit in the plastic piece. 
- 
            Insert a flat head screw driver into the slit and pull down to access the focus lens. 
 
- 
            
- 
                  
                  - 
            When inserting new focus make sure to orient it where the two tabs are facing towards you with the smaller tab facing up. 
- 
            Angle the focus lens to make installation easier. 
- 
            Lay the new focus lens into the plastic tray. 
 
- 
            
- 
                  
                  - 
            Insert screw driver into the slit and push up to close. 
- 
            You will hear a click when the plastic tray is back in place. 
 
- 
            
- 
                  
                  - 
            When re-installing the lens line up the orange dots that are one both lens and camera. 
- 
            Fit lens into place and turn clockwise to secure it back to camera. 
 
- 
            
You have now completed a focus lens replacement.