Introduction
A batteries' cycle life will only last for so many charges. In time the battery may no longer hold a charge to power your device. In this guide, we will show you how to change the battery of the Solio Rocsta.
Tools
- 
                  
                  - 
            Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver. 
 
- 
            
- 
                  
                  - 
            Using a T6 Torx screwdriver, unscrew the 5.66 mm screws attaching the circuit board to the case and flip the circuit board. 
 
- 
            
- 
                  
                  - 
            With the circuit board flipped, locate the battery connector. 
- 
            Hold the component attached to the circuit board the battery is connected to and wiggle the cable out. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.