Samsung WB850F Control Panel Replacement

Written By: Jousling Vazquez
  • Comments: 1
Samsung WB850F Control Panel Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. RPAPKwrZPM4Grwm3
    RPAPKwrZPM4Grwm3
    KfCqaJuJqWgJTvgX
    ll6mWHYyNb1N1NhP

    • Use the Phillips #0 screwdriver to remove the six outside screws. Orientation is from the front of the camera.

    • 2 screws are located on the bottom.

    • 2 screws are located on the left side. (HDMI port)

    • 2 screws are located on the right side of the camera. (Opposite HDMI side)

  2. cpg6Jw3wsnD2qOeG

    • To remove the back screen case, use the blue opening tool to open the case up from the right side.

  3. iHTIAKV6fjVdiWD5
    iHTIAKV6fjVdiWD5
    XvcMVACbuJUHInHT

    • Use screwdriver to remove control panel screw.

    • Lift up control panel from the side where the screw was just removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jousling Vazquez

Member since: 08/02/16

431 Reputation

One comment

Only problem .. Where can I buy a replacement control panel.

D Traynor -