Introduction
Your camera's screen is essential to the viewing of most camera actions. This guide will teach you how to access and remove the Samsung ST76's screen.
Tools
- 
                  
                  - 
            Use a Phillips head screwdriver to remove 5 screws from the camera. There are 2 4mm screws on the left side, 2 2mm screws on the right side and 1 4mm screw on the bottom. 
 
- 
            
- 
                  
                  - 
            Remove the yellow cable by pulling gently upwards, away from the inside of the camera, until it separates from its port. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.
One comment
Where did you buy a replacement screen?