Samsung PL200 LCD Screen Replacement

Written By: Jacob Presnell
  • Comments: 0
Samsung PL200 LCD Screen Replacement

Difficulty

Moderate

Steps

6

Time Required

15 minutes

Introduction

Replace a broken, cracked or frozen screen on your Samsung PL200 digital camera. Tools are required to access interior camera components.

  1. 2FdLPphgfGJbEZy6

    • Remove the six 3 mm external screws from the camera base using the Phillips #000 screwdriver.

  2. X2ZHRqWOerCXC2nK
    X2ZHRqWOerCXC2nK
    YQbQig64tlwhUqdf
    GKLFEQTOLJWcsHjX

    • Use the plastic opening tools and your fingers to pull the external cover off.

  3. xTY6JWKUsEJNtSob
    xTY6JWKUsEJNtSob
    HTFrD1jDCMmhPk1e

    • Remove the 3 mm screw holding the circuit board.

    • Use a pair of tweezers to detach the two ribbon cables connecting the circuit board to the camera.

    • Remove the circuit board.

  4. nbE6QoHLmfCVTsL5
    nbE6QoHLmfCVTsL5
    6MSyUPuHgRj3wxpC

    • Flip the LCD screen forward and remove the two 3 mm screws holding the metal midframe using a Phillips #000 screwdriver.

    • Remove the midframe using an opening tool.

  5. Ef3rPdrMKCaVSQSb

    • Remove the front cover. It will come off fairly easily.

  6. nb31tvUpMoRLbaq4
    nb31tvUpMoRLbaq4
    SSMhmcOTpFYZCGUO

    • Lift the black strip and the ribbon will easily come out.

    • After doing this, the LCD screen will be separated from the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jacob Presnell

Member since: 29/01/15

219 Reputation

0 comments