Repairing AcuRite Intelli-Time Alarm Clock Unresponsive Buttons

Written By: Nicholas Roppolo
  • Comments: 0
Repairing AcuRite Intelli-Time Alarm Clock Unresponsive Buttons

Difficulty

Easy

Steps

7

Time Required

5 minutes

Introduction

  1. NAKKmZZLqaSKXe2H

    • Flip device upside down and remove the 4 foam pads at each corner.

    • Remove the 4 screws using a Philips Screwdriver.

    • Gently lift the case off of the body and set down in a safe place.

    • Unscrew Circuit board attached to the top of the case with the one screw in the center. Be careful not to strip the screw/break the circuit board.

  5. yaRSRrJB3AC1yXFG

    • Make sure all of the buttons are move-able.

    • Press buttons on circuit board while listening for a click.

    • If everything works on the inside, that might mean you need a new circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nicholas Roppolo

Member since: 25/10/13

426 Reputation

0 comments