Introduction
Use this guide to remove the condenser cover from an older Whirlpool Side By Side Refrigerator. It is a simple procedure that requires only a 1/4‑inch nut driver.
Tools
-
-
Lift the bottom edge of the condenser cover away from the refrigerator.
-
Pull down on the condenser cover to free it from the retaining tabs at the top edge and remove it.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
Take your e-waste to an R2 or e-Stewards certified recycler.
