Introduction
In order to replace the viewfinder on your RCA Small Wonders Camcorder CC176, it only takes a small flathead screwdriver, a safe place to keep the screws that you will take out of the camcorder, and a little bit of patience.
Tools
- 
                  
                  - 
            Remove the 5 screws that secure the control panel (located on the top of the device) by using your small flathead screwdriver. 
- 
            Loosen the panel from the device until you are able to remove it. 
 
- 
            
- 
                  
                  - 
            Remove the remaining 21 screws on the camcorder. 
- 
            Begin separating the plastic casing from the inner components of the device. 
 
- 
            
- 
                  
                  - 
            Grasping the viewfinder in hand, carefully remove the two screws that secure the mounting device. 
- 
            Locate the gray electrical cord that connects the viewfinder to the inner components of the camera. Gently unplug the gray cord and loosen the viewfinder from the device. 
 
- 
            
- 
                  
                  - 
            Separate the viewfinder from the device and feed the gray cord through the hole in the plastic casing. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.