Introduction
RCA Small Wonders Camcorder cc 176 was manufactures May 1993. Use this guide to remove the control panel of the camcorder to repair or replace panel.
Tools
- 
                  
                  - 
            Remove the 5 small black screws along the edges of the control panel at the top of the device. 
- 
            Wedge a small flathead screwdriver around the edges of the panel. Loosen the edges of the panel until it pops away from the device. 
- 
            Locate the blue circuit strip along the underside of the control panel and disconnect it from the inner components of the device. 
- 
            Remove the top control panel from the device after it has been disconnected. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.