Polaroid OneStep 2 Film Door Latch Replacement

Written By: Abby Boucher
  • Comments: 2
Polaroid OneStep 2 Film Door Latch Replacement

Difficulty

Easy

Steps

2

Time Required

4 - 5 minutes

Introduction

If you need to replace the film door latch, use this guide to access the inside of the camera. You may need to replace the latch if your camera will not close.

  1. U6SnnAINsJKmJN6A
    U6SnnAINsJKmJN6A
    VUFrcFVrDQeGHENn

    • Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.

  2. rSDSqYdW5FTXbaIl

    • Remove the bottom of the base and piece containing the film door latch.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Abby Boucher

Member since: 10/09/18

823 Reputation

2 comments

This doesn’t actually say anything about replacing the latch…

austin.ranson -

But where do you buy a replacement latch?

Graceann Conn -