Introduction
This guide will assist you in removing the back casing of the clock to access the on/off switch and put it back in place.
Tools
- 
                  
                  - 
            Hold clock so that the clock face is facing away from you. 
- 
            Using your thumbs, push up on the battery cover. 
- 
            Once battery cover is removed, pull down on AC Adapter Jack. 
 
- 
            
- 
                  
                  - 
            Use one hand to stabilize the clock. 
- 
            Using your other hand, push batteries toward spring and pull out at an angle. 
 
- 
            
- 
                  
                  - 
            Use a Plastic Opening Tool to pry off the silver casing on the back. 
- 
            Pry at the top of device. 
- 
            Once the back is open at the top, pry at the side of the device closest to the battery compartment. 
- 
            On/Off switch should come off with casing. 
 
- 
            
- 
                  
                  - 
            Insert switch into slot as shown in picture. Push in until you hear a "click." 
- 
            Replace the back of the clock by pressing cover back into place. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.