Introduction
Prerequisite Only
Tools
-
-
Locate the strap eyelet side of the camera and remove the 2 Phillips #00 5.3mm screws in the handle.
-
Using your fingers, take off the handle, the black casing underneath, and gently wiggle out the shiny black casing below that.
-
-
-
On the bottom of the camera, remove the single Phillips #00 3.5mm screw from the casing below the grip.
-
Using a plastic opening tool, gently pry the Olympus grip up and remove it.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
