Introduction
This guide provides instructions for replacing a broken LCD screen on the Olympus Stylus 725.
Tools
- 
                  
                  - 
            Remove the battery by placing your thumb on the bottom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed) 
- 
            If the battery is dead, charge it for 60-90 minutes. 
 
- 
            
- 
                  
                  - 
            Remove the four 3 mm long cover screws at the corners of the camera using a Phillips #00 screwdriver. 
- 
            Remove the 2 mm long screws securing the sides of the camera which holds the back panel using a Phillips #00 screwdriver. 
 
- 
            
- 
                  
                  - 
            Detach the ribbons using your thumb, sliding them out of their slots. 
- 
            Set the back panel face up to keep the ribbons from touching anything. 
 
- 
            
- 
                  
                  - 
            Remove the screws in the back panel using a Phillips #00 screwdriver. 
- 
            Detach the ribbon cables that connect the LCD to the back panel of the camera. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.