Olympus SZ-12 Back Case Replacement

Written By: Samuel Hays
  • Comments: 0
Olympus SZ-12 Back Case Replacement

Difficulty

Easy

Steps

6

Time Required

15 minutes

Introduction

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

  1. JyaKJWUqcUjWhovG
    JyaKJWUqcUjWhovG
    V6TFyrM54IMCxePe

    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

  2. wbRtUHYROu2VAHwu

    • There are four screws to take out on the bottom of the camera.

  3. YDjTuvTPg6EhkLrF

    • There are three screws to take out on this side.

  4. tXQH4UvKvekpVsYk

    • There is one screw to take out on this side.

  5. uKdlrAXhedCSFOYK

    • There is one hidden screw inside the HDMI port.

  6. UKcbknZwnKAQQRxD

    • Using the blue plastic opening tool, wedge open and remove the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Samuel Hays

Member since: 14/03/17

539 Reputation

0 comments