Introduction
Back case acts as a door to access change out film. It can be easily removed from the device and replaced if it becomes cracked or otherwise unusable.
- 
                  
                  - 
            In this guide we will refer to 'left' and 'right' as though the camera is facing away from you. 
- 
            Pull up on the film rewind lever on the top left of the camera to release the back door. 
- 
            Once the door is released, open it completely. 
 
- 
            
- 
                  
                  - 
            Locate the silver tab on the inside of the door hinge. Slide this down to free the hinge and remove it from the camera. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.
