Introduction
- You will need a #00 phillip's head screwdriver and a black spudger (or equivalent tool)
Tools
-
-
Open the battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of the orange lever.
-
Remove this screw using a Phillips #00 screwdriver.
-
-
-
Rotate the camera to find the side panel with the lanyard attachment.
-
Detach the side panel by the lifting bottom corner slightly with the spudger.
-
-
-
Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.
-
-
-
With the back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
