Introduction
This guide is a walk through on how to replace/install your battery and/or SD card for your camera.
Parts
-
-
Make sure that your camera is turned off before beginning any replacement of parts.
-
Flip the camera over to the Battery/SD Card compartment at the bottom right of your camera, located directly under the Coolpix logo.
-
This slot is for the camera's battery.
-
This slot is for the camera's SD card.
-
-
-
Using your finger, push on the latch in the direction of the arrow to release the battery from the locking mechanism holding it in your camera.
-
Push down the SD card to release it from the locking mechanism in your camera.
-
Once the Battery and SD Card are loose, you can pull them out of their respective slots.
-
To reassemble your device, follow these instructions in reverse order.
