Introduction
Safely replacing the battery door is a necessary step in protecting the internal components of the camera. Thoroughly completing this process also protects the waterproof integrity of the piece.
Tools
- 
                  
                  - 
            Using your thumb and pointer finger, open the card/battery hatch by pressing the center button of the wheel and turning the entire wheel to the left. 
 
- 
            
- 
                  
                  - 
            After pressing the yellow tab, the battery should loosen. 
- 
            Slowly pull the battery completely out. 
 
- 
            
- 
                  
                  - 
            Using the metal spudger, carefully pry on the plastic plate. 
- 
            The plastic plate should begin to loosen. Completely remove it from the camera body. 
 
- 
            
- 
                  
                  - 
            Open the battery door. Near the hinge, a pair of screws should now be exposed. 
- 
            Using a Phillips #00 screwdriver, remove the 2, 4mm screws. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.