Introduction
This guide will outline how to remove a dead battery, as well as how to properly install a new one.
Parts
- 
                  
                  - 
            Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible. 
- 
            To open the battery compartment, push the latch underneath the word BATTERY to the left. 
 
- 
            
- 
                  
                  - 
            Flip the camera so that the bottom rests on the table. 
- 
            Turn the Mode dial to [A] to verify that the control panel shows a full power indicator. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.
