Minolta Maxxum STsi Clock Battery Replacement

Written By: Conner Lawston
  • Comments: 2
Minolta Maxxum STsi Clock Battery Replacement

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

If the camera's internal clock has stopped working or showing time, it may be necessary to replace the clock battery on the inside of the camera.

  1. EeHIIOcaMOvVE23G

    • Press up firmly on the back-cover release on the right side of the camera to release the back panel.

  2. jQXywFRAhOaHEoOL

    • Use a coin to twist open the battery compartment (twist counterclockwise).

  3. P5ODXPE3uSFOgLCZ

    • Use tweezers to lift off the battery compartment cover.

  4. imld4aTsXRPue4hP

    • Use tweezers to take out the old clock battery and replace it with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Conner Lawston

Member since: 21/04/15

219 Reputation

2 comments

Will the camera itself stop working if there is no clock battery?

Olivia Ortiz -

nope. it’s don’t stop working without clock battery

Pavel Gogin -