MerchSource the Black Series Boat Racer Battery Replacement

Written By: Monica Reece
  • Comments: 0
MerchSource the Black Series Boat Racer Battery Replacement

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

This repair guide will show you how to replace the batteries in the MerchSource the Black Series Boat Racers toy boat to solve powering on issues.

  1. MFIWnBRS35TTmqtX
    MFIWnBRS35TTmqtX
    WVxmNLlFqvHsmAFQ

    • Remove the screw on the top of the boat to access the battery compartment. Use a Phillips #2 screwdriver.

    • Screw size is 16 mm in length.

  2. FaJLysFBbLODDAg3
    FaJLysFBbLODDAg3
    nAMukNWn3UK1vYlq
    YelAJYlacCfN1FJN

    • Remove the battery compartment cover by sliding the cover in the direction of the back of the boat to disengage the lip holding it on.

  3. vN4A6XI2TGa5weLy
    vN4A6XI2TGa5weLy
    VXEI4YMyR4py4EHY
    uUJJEbpmRZyngBW1

    • Remove the 6 screws using a Phillips #2 screwdriver. Ensure you store the screws where you will not lose them.

    • Remove the battery cover once all the screws are removed.

    • Screw sizes are all 10.5 mm in length.

  4. Pg3vDGuiF3afYjEI
    Pg3vDGuiF3afYjEI
    EcdKIRLtFmVFPjIY

    • Replace with new batteries, which are 6 x AA. Make sure the positive and negative ends of the batteries align with the positive and negative connections in the battery compartment.

    • Check to make sure the boat is functional. If it is not powering on, consult the troubleshooting page.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Monica Reece

Member since: 31/08/18

672 Reputation

0 comments