LiFePO4 Battery Revival with multimeter

Written By: Anchevauls Walker
  • Comments: 0
LiFePO4 Battery Revival with multimeter

Difficulty

Very easy

Steps

3

Time Required

1 - 2 hours

Introduction

I currently don't have a LiFePO4 Battery charger, so this is a tutorial for how to charge one with your multimeter.

    • Set your multimeter to diode testing.

    • Make sure your meter is on continuity, and not resistance.

    • Make sure the polarity is not reversed, or damage can occur to the battery.

    • Make sure your multimeter battery is a 9v, otherwise button cells will drain quickly.

    • Wait 1 to 2 hours for battery to charge, then put on a charger.

Conclusion

A half charged LifePO4 battery

Author

Anchevauls Walker

Member since: 15/06/22

252 Reputation

0 comments