JBL Link 10 battery Replacement

Written By: 776831
  • Comments: 2
JBL Link 10 battery Replacement

Difficulty

Moderate

Steps

7

Time Required

50 minutes

Introduction

    • jbl link 10 battery replacement

    • peel the bottom cover off

    • be careful not to damage the charging port

    battery is not in the bottom (incorrect) at the top you do not have to take off the bottom!! remove the top

    paul stragauskas -

    • remove the screws that are hidden underneath the base

    • carefully remove the charging port

    • be careful of the cables that are still connected to the motherboard.

    • use a flat screwdriver or spudger to carefully pry up the plastic

    • carefully unplug the old battery from the 6 pin connector on the motherboard

    • -be extremely careful not to damage the connector.

    • carefully take the old battery out.

    • this should be easy if you are doing it correctly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

776831

Member since: 10/06/21

1122 Reputation

One comment

Mi bocina jbl prende muy bien pero no quiere cargar se queda en el rojo y no indica con la luz que está carga. Le compré la batería nueva y se la reemplazé su cable de cargar está bueno.

Por favor ayúdeme. Gracias

Myriam0816 -