Insignia NS-CLOPP2 Speaker Replacement

Written By: Dilini De Silva
  • Comments: 0
Insignia NS-CLOPP2 Speaker Replacement

Difficulty

Moderate

Steps

4

Time Required

15 - 20 minutes

Introduction

An Insignia NS-CLOPP2 Speaker is used to wake one up with a clear alarm for waking up on time as well as a built-in radio tuner for listening entertainment. Here are the tools, skills, and requirements needed to replace a broken Insignia NS-CLOPP2 Speaker that is no longer creating any type of noise or the speaker is creating gray noise.

  1. jVKFAVIXvwAQEVNS

    • First, unscrew the back panel with a ⅓ Phillips screwdriver. Then, gently pull to remove the motherboard.

    • Do not cut any wires when removing the motherboard

  2. t6tExIcESyXMwbEX

    • Identify the speaker: the circular, dark blue device.

  3. oJB5taRXdYuSVoYF

    • Scrape off the glue using an opening tool to detach the speaker from the black clock.

  4. ulxOVUIExFPDKxMd

    • After removing the adhesive, carefully remove the speaker from the device.

    • Use a technology-friendly adhesive to reinstall the new speaker.

    • To reassemble your device, follow these instructions in reverse order.

Author

Dilini De Silva

Member since: 11/03/15

757 Reputation

0 comments