How to Remove the Top Panel of Your Whirlpool Dryer Prereq

Written By: Bill Gilbert
  • Comments: 0
How to Remove the Top Panel of Your Whirlpool Dryer Prereq

Difficulty

Easy

Steps

3

Time Required

No estimate

Introduction

  1. u4WTU4KTBjf1GgPm
    u4WTU4KTBjf1GgPm
    KmGeNIaHMQTiHSWW
    UyNbTg6t3WxLV6FM

    • Throughout this guide, keep track of each screw and reinstall it exactly where it came from.

    • Use a nut driver to remove the screws securing the top panel to the rear panel bracket.

  2. gbDdHJLNo1Iiq3Y1
    gbDdHJLNo1Iiq3Y1
    vxW1WX6cffbgMuaD

    • Grasp the top and slide it 1/2 to 1 inch toward the rear of the machine.

  3. 2iNpUqjOIuDIiEQU
    2iNpUqjOIuDIiEQU
    IkW1XSsjMSmLOsT2

    • Lift the top panel upward to separate it from the chassis.

    • Remove the top panel from the machine.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Bill Gilbert

Member since: 30/06/22

35117 Reputation

0 comments