Hot Wheels AI Intelligent Race System Car Motor Replacement

Written By: Peter Nguyen
  • Comments: 1
Hot Wheels AI Intelligent Race System Car Motor Replacement

Difficulty

Moderate

Steps

4

Time Required

4 minutes

Introduction

  1. JR5RHqqplAUZ6tBG
    JR5RHqqplAUZ6tBG
    rSdslnJaXIJ663kD

    • Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.

  2. pN1xBxJWbFSkENGS
    pN1xBxJWbFSkENGS
    DJDdTKgOZGaW5MGP

    • Locate the next six screws and use a #J0 JIS Screw to take them off.

  3. S2SaXXfOGMlvWyKv

    • Remove the back-cover off and make sure there are no rust or disconnected wires.

  4. MadchmLlxSFl15jt
    MadchmLlxSFl15jt
    U6UhMETYFp6xUSiq

    • Locate the receiver which is towards the back end of the car.

    • Replace the receiver by disconnecting the wires.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Peter Nguyen

Member since: 07/09/18

261 Reputation

One comment

What size is the motor, so I can order prior to starting the repair? Also, can I slightly upgrade the motor for a faster car?

darsehole -