Introduction
This is another protective layer you will need to remove prior to accessing the internal parts of the device.
Tools
- 
                  
                  - 
            Remove the white sticker covering the screws (if applicable). 
- 
            Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device. 
 
- 
            
- 
                  
                  - 
            Insert the plastic opening tool along the seam of the back case. 
- 
            Gently slide the plastic opening tool along the entire seam popping the clips free. 
 
- 
            
- 
                  
                  - 
            Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.