Introduction
If you're having issues with connectivity on your backup camera and you know the issue is with your wires, then here are some steps to replacing your T-taps. You will not need any tools for this guide.
-
-
Take the red covers and gently slide them down so that the metal frame and copper wires are sticking out.
-
-
-
Gently unwrap the copper wirings from the metal frame.
-
Then slide the red coverings off the wires.
-
-
-
In the box that comes with the backup camera you will have two spare T-taps.
-
To put your New T-taps in simply retrace these steps.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
