Introduction
Tools
Parts
- 
                  
                  - 
            Remove the green board with the controls first. 
- 
            DON'T USE FORCE, it should get lose easily. Don't bend the cables too much. 
- 
            Remove the cable from the control board 
- 
            Lift the display off, don't bed the cable too much. 
- 
            Open the connector of the cable carefully. Don't scratch the board and don't use too much force. Ideally, use a plastic spudger of the ifixit-kit 
- 
            The display got removed, not just fit the new display in reveresed order. 
 
- 
            
                            
                            Conclusion
                          
                          Follow the steps in reverse order to reassemble.