Introduction
Tools
- 
                  
                  - 
            Turn the camera off by pressing the small, square button embedded in the top rim of the camera. 
- 
            Locate the battery hatch on the bottom-right side of the camera and slide it outwards to open. 
- 
            In the compartment, move the small notch and push down on the battery to remove it. 
 
- 
            
- 
                  
                  - 
            Remove the eight screws around the sides and bottom of the camera using a Phillips #00 screwdriver. 
 
- 
            
- 
                  
                  - 
            Using the Phillips #00 screwdriver, remove the eight black screws connecting the green keypad chip to the rear panel. 
 
- 
            
- 
                  
                  - 
            Using the Phillips #00 screwdriver, remove the 3 screws located across the top of the camera. 
- 
            Separate the black plastic panel from the camera. The camera button will be attached, so be gentle. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.