Introduction
Tools
- 
                  
                  - 
            Locate the opening line between the cover and the device. Then locate the groove near the charging port. 
 
- 
            
- 
                  
                  - 
            Use a metal spudger to separate the back cover from the front touch screen. 
- 
            To do this, place the metal spudger in between the groove near the charging port of the device to unlatch the first clip. 
 
- 
            
- 
                  
                  - 
            Continue to separate all of the clips around the device until the back cover comes off completely. 
 
- 
            
- 
                  
                  - 
            After taking out the back cover, locate the black flap. 
- 
            Open the black flap with the plastic opening tools. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.