Introduction
This guide will show you how to remove the power button in order to replace it.
Tools
- 
                  
                  - 
            First make sure the camera is powered off. 
- 
            Then take the Hex and PH000 bit to remove a 2mm screw on the left side of the camera. 
- 
            Next, remove the 2mm screw on the right side of the camera. 
 
- 
            
- 
                  
                  - 
            Remove the 3mm screw from the bottom of the camera. 
- 
            Once the 2mm and 3mm screws are removed, use the plastic opening tool to lift the sides of the camera and reveal the inside of the camera. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.