Ceiva LF2003 Internal Plastic Screen Frame Replacement

Written By: Casey Glasgow
  • Comments: 0
Ceiva LF2003 Internal Plastic Screen Frame Replacement

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

Replacing the internal frame on this device is very simple and requires minimal disassembly.

  1. UxyjLAgfxjSBlZ2v

    • Lay the device on its back, and rotate so the base is facing away from you.

  2. dyON2YFTZOGissFo

    • Grip the frame with your fingers under the edge of the frame, and thumbs pushing down on the front of the device.

  3. fxMylvnRoORdEVDT

    • Lift up the frame with your fingers and push down the rest of the device with your thumbs.

  4. eexa2PBdtIilyYge

    • Remove the frame and matte from the device.

  5. ENlGDjPr5iUSYlJ4

    • Remove the four 7mm Torx T6 screws.

  6. PHK5SNmFufc4HMqF
    PHK5SNmFufc4HMqF
    3mG4tPyXnPgHIRXQ

    • Using the plastic opening tool or your fingers, lift up the frame from any edge.

    • Remove the frame from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Casey Glasgow

Member since: 27/01/14

510 Reputation

0 comments