Introduction
A damaged flex hose on your Bissell OptiClean Cyclonic Vacuum could be a reason that suction power is lost or low. If this is the case, it will be necessary to replace the damaged flex hose with a new one. This guide will teach you how to detach and replace the flex hose with handle on your Bissell OptiClean Cyclonic Vacuum.
- 
                  
                  - 
            Grab hold of both the flex hose handle and the extension wand. 
- 
            Pull straight out to detach the handle from the extension wand. 
 
- 
            
- 
                  
                  - 
            Hold down the lock clip to unlock the flex hose from the vacuum. 
- 
            Remove the flex hose from the vacuum. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.