Belkin NetCam HD Case Replacement

Written By: Destinie DiazVerdejo
  • Comments: 0
Belkin NetCam HD Case Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

This guide walks you through how to open the device on the NetCam.

  1. dINkYTvgMHGxInCZ

    • Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.

  2. plCkaNnbG3sgVpIY

    • Work a plastic opening tool into the seam and pry the face plate away from the back panel.

  3. 4tDMKHJx2HUaEU6t
    4tDMKHJx2HUaEU6t
    uppIOY2OIEI4SKKV

    • Use pressure to separate the covers.

    • When pulling the device apart, separate from the bottom up in order to avoid pulling the wiring at the top apart.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Destinie DiazVerdejo

Member since: 04/10/16

805 Reputation

0 comments