Introduction
This guide will show you how to replace the worn-out earpad cushions on your Audio Technica ATH-M40x headphones. Whether you want to extend the life of your headphones, restore sound quality, or opt for cushions that provide a better fit, this guide has you covered.
Make sure replacement cushions match the specifications of the ATH-M40x model before you begin.
Tools
Parts
- 
                  
                  - 
            Turn the headphone cable counter-clockwise to unlock. 
- 
            Remove the headphone cable by pulling it out. 
 
- 
            
- 
                  
                  - 
            With one hand, hold your headphones in place while the other grips the earpad cushion. 
- 
            Gently pry the old earpad cushion off. 
 
- 
            
- 
                  
                  - 
            Use a microfiber cloth to wipe off any moisture or debris from the headphone drivers before installing your new earpad cushion. 
 
- 
            
- 
                  
                  - 
            Align the edge of new cushion to your headphone driver. 
- 
            Slide the cushion over the headphone drivers until it is fully attached. 
 
- 
            
2 comments
Hello, when you go to the page for the device Audio Technica ATH-M40X there seems to be no guides for it, maybe this guide could be made to appear there.
Hi @miguelgall61457, I've placed the guide on the correct device page. Thank you!