2016 Jeep Cherokee Windshield Wiper Replacement

Written By: mehmet coksurer
  • Comments: 0
2016 Jeep Cherokee Windshield Wiper Replacement

Difficulty

Very easy

Steps

5

Time Required

5 minutes

Introduction

Windshield wipers should get changed almost every six months based on usage. When the blades get damaged, it can cause a lack of visibility due to not contacting properly with the windshield surface. Here are a few easy steps for changing and replacing the 2016 Jeep Cherokee windshield wiper on your own.

  1. IylncHLimPWlbt1u
    IylncHLimPWlbt1u
    CqSJE1pRYe21YlpQ
    IA4rvTeiCgiNkHZe

    • If the broken wiper is located on the passenger side, then you will need to purchase an 18-inch wiper.

    • If the damaged wiper is located on the driver side, then you will need a 26-inch wiper.

  2. 1j5FPfhJDUtVMuaU
    1j5FPfhJDUtVMuaU
    IJsWSjpAlNsy3RvF
    bsBtA3N2ceNRaLnA

    • Most blades are held in place with a tiny clip.

    • Push that clip up, while you are pushing the blade backwards.

  3. MreHD5bxssPWgePA

    • Once you get the blade free from the hook, push the blade down to disconnect it.

  4. kg1vX6GGTcj4Pc5o
    kg1vX6GGTcj4Pc5o
    ZZRqCrXnjKXZgasi
    Ay6a41hxiSYvUMUg

    • After disconnecting the old wiper, position the new blade so that the hook points toward the area where you just detached the old wiper.

  5. NFT1AdZ3BveQppIL

    • Push the blade towards the arm.

    • Make sure the hook is inside the arm.

    • When completed, you will hear it click, this means that the wiper has been successfully installed.

Author

mehmet coksurer

Member since: 16/01/23

121 Reputation

0 comments