Introduction
Tools
Parts
- 
                  
                  - 
            Begin by opening the hood of the car and locating the battery on the front of the driver side in the engine compartment 
 
- 
            
- 
                  
                  - 
            Using a socket wrench, loosen the 2 (5/16 inch) nuts on the top of the battery support bracket 
- 
            Remove the bracket by lifting up 
 
- 
            
- 
                  
                  - 
            After removing the bracket, locate the supporting rod behind the battery 
- 
            The rod is hooked on a hole in the metal behind the battery. Unhook the rod and remove it 
 
- 
            
- 
                  
                  - 
            Start with the negative terminal of the battery 
- 
            Loosen the nut on the negative terminal with a 10mm socket wrench 
- 
            Remove the wire by slightly twisting and pulling up 
 
- 
            
- 
                  
                  - 
            Remove the cap from the positive terminal of the battery 
- 
            Using a 10mm socket wrench, loosen the nut on the positive terminal 
- 
            Remove the wire from the positive terminal by slightly twisting and pulling up 
- 
            Remove the battery by lifting it out of the engine compartment 
 
- 
            
To reassemble your device, follow these instructions in reverse order.